Third-party components
To set up an EmbroideryConnect network, some third-party hardware items are also required…
| Component | Details |
|---|---|
| USB-capable embroidery machines | Able to read designs from USB memory stick. Preferably with the USB port built into the control panel. Add-on USB converters in old machines may not be compatible. |
| Compatible WiFi router | See below for details. |
| Barcode reader | Optional. |
| Windows Administrator privileges | Access must be configured by a user who has full administrator privileges and is part of a Windows ‘Workgroup’ or ‘Domain’ network. |
WiFi router compatibility requirements
Note the following WiFi router requirements to be compatible with the EC device:
| Requirement | Details |
|---|---|
| Standard security protocol | The WiFi router must use one of the standard security protocols: WEP or WPA/WPA2 Personal. Security type ‘none’ or ‘unsecured’ is not supported at present. A WiFi password is mandatory. |
| Support for WLAN Protocol 802.11 G | The WiFi router needs to support WLAN Protocol 802.11 G in the 2.4 Ghz band. The EC device will not connect to a WiFi router using the 5 Ghz band. If unsure, consult the documentation provided with your router. |
| WiFi network name | You must know the WiFi network name (SSID) and WiFi router password (key). We recommend using a SSID (network name) that contains only alphanumeric characters – letters and numbers. |
| WiFi coverage | WiFi coverage must be sufficient to serve the entire production area. |